Rule-Mate 2000 GPH Fully Automated Bilge Pump 12V - All-In-One Pump

Rule-mate 2000 gph 12 volt fully automated bilge pump. The rule-mate® 2000 gph pump consists of a powerful rule® bilge pump and a highly intelligent circuit board in a single housing. The pump activated when the water reaches 2-1/2" and automatically shuts off when the pump senses no water against the impeller, reducing the remaining water to approximately 5/8". Rule-mate intelligence. Rule-mate bilge pumps have built-in programming that can sense when the pump is running but not pumping water. This is a very unique feature to bilge pumps because it protects the pump and the vessel, especially the vessels batteries. If debris fouls the sensor or the pump becomes air-bound, the pump will stop running and begin to "check" for water every 2-1/2 minutes. Once the debris is removed, the pump will revert to its normal operation, turning on when the water reaches 2-1/2" and shutting off at 5/8". 2000 gph (7570 lph) at 0' (13.6v). All-in-one pump and switch. Extra long life heavy duty motor. 1" nps discharge with 1" and 1 1/8" screw-on ports. Three year warranty. Manufacturer: rule. Marine plumbing & ventilation-bilge pumpsvolts = 12v. Power - max continuous (amps) = none. Outlet size = none. Operation = automatic. Gallons per minute = 33.3. Gallons per hour = 2000.